MERCURY FILLED TEMPERATURE GAUGES

Instruments are housed in Die - cast Aluminum Weather proof or SS 304 cases. These cases are as per IP-65 specifications. These cases are ideally made to suit surface and panel mounting with bottom and back entry. The Instruments are available in rigid stem and with capillary extension.Instruments are designed for quick response. External room temperature will be compensated with case
compensation & in critical condition with the help of double capillary for full compensation

BI-METALLIC TEMPERATURE GAUGES

Instruments are housed in weather proof Die-cast Aluminum or SS 304 cases as per IP-65. Instruments are available in stem type only with bottom and back entry. Hazardous and Food processing environment warrant the use of this type of instruments

GENERAL SPECIFICATIONS
Case & Bezel : Die - cast Aluminum or SS 304 or M.S.
Powder Coated
Window Glass : Sheet glass
Dial size : 65mm, 75mm, 100mm 150mm
Stem Material : SS 304 or SS 316
Stem size : 6, 8, 10, 12, 15mm, Stem length up to 900mm.
Connection : 3/8”, ½”, 3/4”, BSP/NPT fixed or adjustable
Range : -20°C to +300°C in standard ranges.
Accuracy : + 2% of F.S.D. (1% is also available on request)
Over Range Protection : 120% of F.S.D.

MERCURY FILLED TEMPERATURE GAUGES
(Anti-Vibration Spring)

These instruments are housed in Die-cast Aluminum Weather proof or SS 304 cases. These cases are as per IP-65 specifications, The instruments are available in rigid stem with anti-vibration spring to prevent vibration.

GENERAL SPECIFICATIONS
Case & Bezel : Die - cast Aluminum with outer screwed bezel or SS 304
Window Glass : Sheet glass / Safety glass / Toughened glass.
Dial size : 100mm, 150mm.
Pointer : Micro zero or Centre zero adjustable
Bulb / Stem Material : SS 316 having 8, 10, 12 & 14mm dia.
Connection : 1/4”, 3/8”, ½”, 3/4”, BSP/NPT , Male / Female
Range : -35°C to 550°C
Accuracy : +1%
Over Range Protection : 120% of F.S.D.

Thermowells

Thermowells are made strictly as per customer’s specifications and drawings. Thermowells are generally used as protective sheild for the probe or outer sheath of an RTD or Thermocouple or Temperature Gauge. These are made bar stock from Stainless Steel and Alloys etc.,as per the requirement & the operating conditions. Fabricated types of Thermowells are also available on request. Thermowells are available in screwed type as per API standards or B.S. pipe threads, flanged with ANSI, B.S., JIS, DIN, and GOST Standards. Special Thermowells in Ceramics, PTFE, Stellite Hastelloy, Nickel, Titanium, Tantalum, Silver etc., are made for trouble free operation in the most
hostile operating conditions.